Container freight station (CFS) in India: what it does and what it costs
A plain guide for importers, exporters, customs brokers and forwarders to the container freight station: what a CFS is in Customs law, how it differs from an ICD, what happens to an import and an export container there, which charges to expect, and when a container can skip the CFS altogether.
Most containers that pass through an Indian port spend time at a container freight station. It is where import boxes are opened and examined, where export cargo is stuffed, and where a large share of the local charges on a shipment arise. This guide explains what a CFS is and how cargo moves through one, with notes for Mundra and Kandla.
This guide is based on the Customs Act, 1962, the Handling of Cargo in Customs Areas Regulations, 2009, CBIC's 2020 policy circular on ICDs and CFSs, and published port practice, as checked on 20 November 2026. CFS tariffs and port procedures change through CBIC circulars and Custom House public notices. Confirm the current position with your customs broker or the CFS before acting on a specific shipment.
Running a CFS or a container desk? Logiintra keeps each container's job, documents, delivery order status and charges together, with tracking by bill of lading.
What a CFS is
A container freight station is a customs area, usually outside the port gates, where containerised import and export cargo is handled under Customs control. CBIC's policy on these facilities describes them as common-user facilities for handling and temporarily storing laden and empty containers. Their functions include receiving and dispatching cargo, stuffing and stripping containers, consolidating and separating loose cargo, and customs clearance.
A CFS works as an extension of the port, inland container depot or air cargo complex it serves. Goods stay there until examination and clearance are complete. Each CFS is notified as a customs area under section 8 of the Customs Act, 1962, by the Commissioner of Customs in whose jurisdiction it lies.
The company that runs the CFS is its custodian. Under the Handling of Cargo in Customs Areas Regulations, 2009, it is a Customs Cargo Service Provider, with duties on infrastructure, security and the safe custody of the goods. Section 45 of the Customs Act keeps imported goods in the custody of such an approved person until they are cleared.
CFS and ICD: the difference
The two are often named together, but they are not the same thing in Customs law.
| CFS | ICD | |
|---|---|---|
| Status | A customs area attached to a port, ICD or air cargo complex | A customs station in its own right, often called a dry port |
| Customs work done there | Normally part of the process, mainly examination, along with stuffing and destuffing | The whole process, from filing to clearance |
| Movement from the port | Treated as local movement within the port's customs area | Transhipment from one customs station to another |
| Typical location | Near the port it serves | Inland, close to factories and consumption centres |
Where a CFS has no port or ICD to attach to, CBIC's guidance is that it can be notified as an ICD instead.
An import container through a CFS
- The CFS is fixed. The shipping line usually nominates it, and many ports let the importer ask for a CFS of choice before the vessel arrives. Ask your customs broker how it works at your port.
- The container moves from the terminal to the CFS under Customs supervision, normally on the CFS's own transport.
- The bill of entry is filed and assessed. Our bill of entry guide covers the deadline, the documents and the late charges.
- Examination, if the bill is selected. The seal is cut and the cargo is examined at the CFS with the customs broker present.
- Out of Charge. Customs releases the goods once duty is paid and any examination is complete.
- Delivery. With the shipping line's delivery order and the CFS's charges paid, the cargo leaves either loaded in the container or destuffed onto your truck.
- The empty container goes back to the yard the shipping line names, before the line's free days end.
For consolidated (LCL) cargo the container is destuffed at the CFS, and each consignee clears and collects its own cargo against its house bill. Our guide to house and master bills of lading explains that paperwork.
An export container through a CFS
- Cargo is carted in to the CFS and the shipping bill is filed.
- Customs examines the cargo where the shipping bill is selected for it.
- The cargo is stuffed and the container sealed under Customs supervision.
- Let Export Order is given, and the container moves to the port terminal for loading.
Many exporters stuff the container at their own factory instead. Those containers either pass through a CFS on the way or go straight to the port, as described below.
The charges to expect
There is no single national tariff. Each CFS publishes its own, and it is worth asking for the tariff sheet before a CFS is nominated. The usual heads are:
- Transport between the port terminal and the CFS.
- Handling, meaning lifting the container on and off.
- Ground rent or storage for each day after the CFS's free period.
- Stuffing or destuffing of the cargo.
- Examination, covering seal cutting, shifting and the labour to open packages.
- Weighment, scanning movement and reefer plug-in, where they apply.
- Surcharges for hazardous or over-dimension cargo.
These are separate from the shipping line's own charges, such as detention on its container. Two clocks run at once: the CFS's free days for storage and the line's free days for the box.
Cargo cannot stay indefinitely. Under section 48 of the Customs Act, goods not cleared within thirty days of unloading may be sold by the custodian, after notice to the importer and with the permission of the proper officer.
Skipping the CFS: DPD and DPE
Direct Port Delivery for imports
Under Direct Port Delivery (DPD), an approved importer takes delivery of the container at the port terminal itself, without the move to a CFS. CBIC set out the eligibility conditions in a circular of 5 September 2019, and Authorised Economic Operators are among those covered. A DPD container that is not cleared and collected in time is normally shifted to a CFS, so the saving depends on having the documents and the transport ready.
Direct Port Entry for exports
Under Direct Port Entry (DPE), a factory-stuffed export container goes straight into the port terminal. The exporter seals it with an RFID electronic seal under CBIC's self-sealing procedure, and Customs reads the seal at the port. If the seal is intact, the shipping bill is processed for Let Export Order in the usual way, subject to risk-based examination.
CFSs at Mundra and Kandla
Mundra is Kutch's container gateway, and several CFSs serve it. They include the Central Warehousing Corporation's CFS on Old Bunder Road, the Allcargo CFS inside Adani Ports and SEZ, and DP World's Mundra CFS, among others. Kandla (Deendayal Port) handles mostly bulk and liquid cargo, with some container traffic. The list of CFSs changes as facilities are notified or closed, so check with the Custom House or your customs broker before nominating one at either port.
Tracking a container at a CFS
- Before discharge: the shipping line's tracking shows the vessel and the discharge.
- At the terminal: the port or terminal's online enquiry shows the container's status by container number.
- At the CFS: most CFSs have a customer portal or a helpdesk that answers by container or bill of lading number.
- With Customs: ICEGATE shows the status of the bill of entry or shipping bill.
Common CFS mistakes
- Documents not ready when the vessel arrives. Every day of delay after the free period is ground rent.
- No delivery order. Out of Charge alone does not move the cargo; the line's DO is needed too.
- Watching only one clock. CFS storage and the line's container detention have separate free days.
- A missing house bill sub-line. LCL cargo cannot be cleared until the consolidator's sub-line is in the manifest. See our IGM and EGM guide.
- Charges not captured. CFS, line and transport bills arrive separately, and any not recorded against the job are hard to recover later.
Where software helps
A container's status, documents and charges change several times between discharge and delivery, and three or four companies touch it. Keeping them on one job means the question "where is the container, and what does it owe" has one answer.
Logiintra's container segment runs CFS operations, import and export container jobs, factory stuffing, delivery orders and container tracking by bill of lading with port milestone updates, with GST billing in the same workflow. Customs filing remains with the importer, exporter or customs broker. See our CFS and container software and customs broker software.
Sources
- CBIC, Customs Act, 1962 (sections 8, 45 and 48)
- CBIC, Handling of Cargo in Customs Areas Regulations, 2009, and Circular No. 50/2020-Customs
- Central Warehousing Corporation, ICD and CFS services
- DP World, Mundra CFS
- ICEGATE portal
More customs and GST guides
Good to know
What is a container freight station (CFS)?
What is the difference between a CFS and an ICD?
Who chooses the CFS for an import container?
What charges does a CFS levy?
What is Direct Port Delivery (DPD)?
Is an e-Way Bill needed to move a container from the port to a CFS?
How long can cargo stay at a CFS?
Track every container, document and charge on one job
Logiintra keeps each container's documents, delivery order status, tracking and charges together. See it on your own container jobs.
98529-98520 · Mon–Sat, 10am–7pm IST
A live walk-through of Logiintra on your kind of jobs, then we plan setup, migration and go-live with you.
Message us on WhatsApp for a quicker reply.
